| Family | Truck/Fleet | Motorcycle/ATV | 4-Wheel | Farm | RV | Boat/Marine | Snowmobile | Lawn/Garden | Industrial | Performance |
AMSOIL Synthetic Stationary Natural Gas Engine Oil

MSOIL SYNTHETIC STATIONARY Natural Gas Engine Oil (ANGS) delivers continuous protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifies it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, eliminating the need for seasonal oil changes.

Controls Wear
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low sulfated ash to minimize carbon deposits and port blockage, resulting in reduced maintenance and extended equipment life. Advanced antiwear and anti-scuff protection helps control valve recession and wear on piston rings, cylinder liners and bearings during continuous severe-service operation in stationary natural gas engines.

Keeps Engines Clean
AMSOIL Synthetic Stationary Natural Gas Engine Oil is engineered with premium base oils and additives to improve engine lubrication by keeping oil passages clean. Its balanced formula allows for a high total base number (TBN) to protect against corrosion while meeting low ash requirements.

Controls Nitration
Nitration is a common concern in natural gas engines and can cause oil to thicken, reducing operational effi ciency. AMSOIL Synthetic Stationary Natural Gas Engine Oil is naturally resistant to nitration, delivering maximum protection in natural gas engines.

Protects Emission Systems
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low zinc and phosphorus levels to prolong the life of emission catalyst systems without sacrifi cing wear protection.

Delivers Continuous Protection
AMSOIL Stationary Natural Gas Engine Oil may be used for extended drain intervals when monitored by an oil analysis program. If extending oil drain intervals, change the oil fi lter at the engine manufacturer’s recommended interval.

AMSOIL Synthetic Stationary Natural Gas Engine Oil is recommended for use in stationary four-stroke and select two-stroke engines that require low-ash (<.50%) engine oil and are fueled by natural gas, including those from the following manufacturers:

  • Bergen
  • Caterpillar
  • Cooper-Bessemer (two-stroke)
  • Dresser-Rand (Clark) (two-stroke)
  • Dresser-Rand (Worthington) (two-stroke)
  • Dresser-Rand
  • Jenbacher
  • MAN B&W
  • MDE
  • MAN Brons
  • Mirrlees Blackstone
  • MWM Deutz
  • Niigata
  • Ruston
  • Wärtsilä NSD
  • SEMT Pielstick
  • Superior
  • Waukesha

NOTE: AMSOIL Synthetic Stationary Natural Gas Engine Oil should not be used in automotive engines or vehicular engines that run on propane or natural gas.

AMSOIL Synthetic Stationary Natural Gas Engine Oil is compatible with conventional petroleum oils and other synthetic lubricants; however, mixing AMSOIL Stationary Engine Oil with other oils will shorten the oil’s life expectancy and reduce the performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed.

Aftermarket oil additives are not recommended for use with AMSOIL Synthetic Stationary Natural Gas Engine Oil.

Technical Properties Chart

Synthetic Staionary Natural Gas Engine Oil - SAE 20W-40
  • ANGS05-EA, 5-gal pail
  • ANGS55-EA, 55-gal drum
  • ANGS27-EA, 275-gal tote

Secure Order Link

For industrial pricing email me at .

For retail pricing information:

  • Go to the ASMOIL On-Line Store through the link above
  • Email me at .
  • Fax me at: 270-522-0512

For prices on larger containers, contact me by email at Bulk Pricing, or by Fax at 270-522-0512.

If You Prefer To Order by Phone: TOLL FREE: 1-800-956-5695 (See Telephone Order Page).
Customer Ordering Number: 522955

Check here for discount pricing plan.

Figure amount in Canadian Dollars.
Copyright © 2000 - 2016 All Synthetics Group. All Rights Reserved.

Home | Top